In-House Moldsprecision aluminum tooling
CAD/CAM Designconcept to finished part
Short & Long Runsprototype to production
Ships Nationwidefrom Carroll, Iowa
Vacuum-formed part on the forming table at ThermoPlaz
What Is Vacuum Forming?

A Faster, Lower-Cost Way to Make Plastic Parts

A sheet of plastic is heated until it's flexible, then drawn tight over a mold by vacuum. Once it cools, the part is trimmed to its final shape. Because the tooling is simpler than injection molding, it's a cost-effective choice for short and mid-size runs with faster turnaround.
■  Lower tooling cost than injection molding
■  Well suited to short and mid-size production runs
■  Large parts and custom shapes
Capabilities

Everything Under One Roof

From the first drawing to the finished part, every step happens in our Carroll, Iowa shop.
Design & Engineering
■  CAD/CAM design
■  Engineering support
■  3D-printed prototypes
Mold Making
■  In-house aluminum molds
■  48″ × 96″ CNC router for large molds
■  Fast mold changes
Forming
■  Vacuum forming in a range of plastics
■  Short and production runs
■  Consistent, repeatable parts
Finishing
■  Laser trimming for an accurate fit
■  CNC routing and cutting
■  Inspection before shipping
How It Works

From Idea to Finished Part

01
Share Your Idea
Send a drawing, a sample part or just a description of the problem.
02
Design
We model the part in CAD and work out the best way to form it.
03
Build the Mold
Our team cuts the mold in-house, so changes are quick.
04
Prototype
We form and test a sample so you can check fit before production.
05
Produce & Ship
Parts are formed, trimmed, inspected and shipped to you.
What We Make

Parts We've Formed

A few of the parts we've designed and vacuum formed for customers, from grocery stores to ambulances.
Replacement deck and drip pan for a grocery display case
Grocery
Deck, drip and hump pans made to fit supermarket display cases.
View pans →
Triple glove box deep draw pan, front view
Triple glove box deep draw pan held at an angle, showing the clear hinged door
Five triple glove box deep draw pans
Emergency Vehicles
Deep Draw Pans
Single and triple glove box holders for ambulances, deep drawn in one piece and fitted with a clear hinged door and latch.
Glossy black canopy trim with mounting hooks for grocery display cases
Grocery
Grocery Case Canopy Trim
Glossy black trim with formed mounting hooks, made to finish the canopy of grocery display cases.
Two long black display trays for grocery store cases
Close-up of the edges of two black grocery store trays
Grocery
Grocery Store Display Trays
Long black display trays formed to fit grocery store cases and keep product neatly organized.
Vacuum-formed cover for a geothermal device with High Pressure and Flow markings formed into the plastic
Geothermal
Geothermal Device Cover
Protective cover with High Pressure and Flow markings formed directly into the plastic.
Clear tray insert with a window cut-out used in a silk screening operation
Manufacturing
Silk Screening Tray Insert
Clear tray insert with a window cut-out, made to hold parts in place during silk screening.
Your Project Here
Have a part in mind? Send us a drawing, a sample or an idea.
Start Your Project
FAQ

Vacuum Forming Questions

What do I need to get a quote?

A drawing, a sample part or a description of what you need. If you only have an idea, we can help design it.

Do you make the molds?

Yes. We build most of our molds in-house, and our CNC router handles large molds.

Can you do small runs?

Yes. Vacuum forming is well suited to short and mid-size runs, and we scale to your timeline.

Where do you ship?

We ship from Carroll, Iowa, to anywhere in the continental United States. Shipping is quoted separately.

Have a Part in Mind?

Send us a drawing, a sample or just an idea. We'll tell you how we'd make it and what it will take.